Introduction and notes machining
Dongguan machining operation must be specified in order to improve efficiency, fewer accidents; Dongguan Shun Wen We remind You: workpieces such as adjusting the time, when the machine must be running at low speed, using the tool, the workpiece can be adjusted directly by hand, absolutely not allowed to tell the machine to adjust the machine running time. To change the rotation direction of the spindle, spindle stop after the first, are not allowed to suddenly change the direction of rotation. When handling the cartridge, except for hand turn V-belt drive spindle rotation row, absolutely prohibited direct starting machine mandatory loosening or tightening. While wooden pad on the bed surface, to prevent accidents. Tool mounting should not extend too long, gaskets to ping, the width of the bottom surface of the tool uniform width. Work allowed to open anti-car approach to the brake spindle rotation.
Dongguan machining, commonly known as machining, or called metal machining. Insiders referred to as machining. Dongguan machining including a variety of processing methods, such as machine parts, machinery parts processing, in some points fine lathe, milling machine, line cutting and so on. For example: There are two main lathe processing forms: one is the fixed tools and processing rotating unformed workpiece, another workpiece is fixed by high-speed rotation of the workpiece, turning (tool holder) and transverse longitudinal movement performed precision machining. Lathe can also be used drills, reamers, the corresponding processing reamers, taps, dies and knurling tools. Lathe is mainly used for machining shaft, plates, sleeves and other workpiece has a surface of revolution, machinery manufacturing and repair facility is the most widely used of a class of machining.
