CNC lathe should do first a few things
Or when some mechanical parts production, will use CNC lathe and processing sectors. And this aspect related to the quality and accuracy of the workpiece. In order to ensure the quality of the workpiece, manufacturers generally will require CNC lathe operation is in progress, the following are a few things to do first.
1, it is determined whether the content of the processing suitability. Not anything can be obtained by a CNC lathe operator before the start to deal with part drawings for analysis, combined with CNC lathes feature, whether the parts that can be used for processing.
2, working principle and process determination. If it is determined that the parts can be used to obtain CNC lathe, the operator should be based on the results of parts, the development of a general principle and processing steps. Due to differences in parts structure, determines the different lathe machining process, for some special parts, special treatment should be done.
3, related tools and dosage is determined. Use CNC lathe parts, and will definitely use a program loop. Thus, each operator to determine the accuracy of the data, and then incorporated into the computer programs in real time, in order to achieve the processing operation.
4, the special technological issues. For special parts, special techniques must be used, these should be reflected in the advance in computer programming, and is available in a timely manner reflect the superiority of CNC lathe.
