Drilling center process

The preparation of CNC machining center should have the function is to do the preparatory preparation, a reasonable choice of CNC machining center of the prerequisites to meet the typical parts of the process requirements Typical parts of the process requirements are the parts of the structural size, processing range and accuracy requirements.According to the accuracy requirements, The accuracy of the workpiece size, positioning accuracy and surface roughness requirements to select the NC machining center control accuracy.
Feature Description:
First, high steel, heavy cutting
◆ large column solid, no deformation can be high-speed displacement 48m / min.
◆ large span base, mining six support structure solid, high-speed displacement, no vibration, no deformation.
◆ three-axis high-speed displacement of 48m / min, fast, save processing time.
◆ low inertia of the spindle design, high stability, gripping knife knife tool change quickly and accurately, tool change time of 1.2 seconds, in addition to parts processing, is very suitable for drilling smaller diameter and hole.
◆ body design with large slope cutting, machine more humane and excellent environmental protection.
◆ Characterized rigid column design, effectively enhance the rigidity of the column to avoid processing vibration.
◆ Machine tool finally through the laser interferometer test and laser round inspection, to provide high-quality round cutting, faster displacement, more fine is reverse milling processing, more than the traditional machine
With high efficiency.
Second, the control system characteristics
◆ using the world's top advanced Mitsubishi CNC system, M70 series are used servo drive to ensure that the control system is stable, fast, smooth surface, high precision
And other advantages, with the mold should have the function, is the best choice for mold production.
◆ All M70 series controllers are equipped with RISC64 bit CPUs.
◆ can correspond to the Ethernet and IC card interface.
◆ Coordinate display value conversion can be freely switched (program value display or manual insertion quantity display switch)
◆ standard embedded waveform display function, working position coordinates and center point measurement function.
◆ Buffer correction function expansion: can correspond to IC card / computer link B / DNC / mind MDI mode.
◆ edit the editing mode in the screen, you can switch to full-page editing or the entire edit.
◆ graphic display function improvement: can contain props path information to fully display the working coordinates and props compensation of the actual location.
◆ simple dialogue program software (using APLC developed by the Magicpro_NAVIMILL dialogue program).

◆ can correspond to Windows95 / 98 / 2000NT40 / ME / XP PLC development software.

News from Eastar