Common knowledge of CNC lathe processing
Repetitive parts of CNC CNC lathe processing: the use of CNC grinding machine to prepare the work of a higher proportion of working hours. Such as the preparation of the process analysis, the preparation of procedures, the first part of the adjustment and adjustment of parts, etc., the sum of these comprehensive hours of work is often a single piece of processing time to hundreds of times to hundreds of times, but these CNC lathe work can be saved up and down, A part of the CNC grinding machine in the successful trial and then put into operation, the production cycle is greatly reduced, spend less, can achieve better economic benefits.
Requirements of key to ensure the quality of processing and efficient
production of small and medium-sized key parts: CNC grinding machine in the computer control to achieve high precision, high quality, high efficiency grinding. It is more than a special grinding machine processing can save a lot of special technology equipment, has a strong flexible manufacturing capacity and get better economic benefits. It is compared with the ordinary grinding machine, can eliminate the complex processing of the long process of many man-made interference factors, processing parts accuracy and interchangeability, processing efficiency is high.
CNC CNC lathe processing parts should be able to fully play the CNC grinding machine multi-process centralized processing of the characteristics of CNC grinding machine parts processing wheel grinding workpiece with the corresponding non-CNC grinding machine is exactly the same, but it can be some processing accuracy requirements Of the complex processing, such as in the grinding range, the ordinary grinding machine is mainly used for grinding cylindrical surface, round CNC lathe cone or ladder shoulder end of the ordinary lathe grinding, CNC cylindrical grinder in addition, but also grinding round Torus, as well as various forms of complex composite surfaces.
Parts of the processing batch should be greater than the ordinary lathe economy batch CNC car in the non-NC grinding machine processing, small batch parts, due to various reasons, pure cutting time only 10% of the actual working hours. This ratio is likely to rise to 70% to 80% when machining in a multi-process CNC grinding machine in a grinding center, but it is often much longer to adjust the working hours. Therefore, when the parts are too small, Uneconomical.
CNC lathe processing some of the special parts of the processing of some parts Although the processing of small batch size, ordinary lathe but complex shape, high quality, require interchangeability, which in the non-CNC grinding machine can not meet the above requirements, can only be arranged to NC Grinding machines, such as parabolic, cycloidal cams, and special mirror mirrors.
