CNC lathe processing
The use of
CNC lathes to process parts not only increases throughput but also increases accuracy. So modern CNC lathe processing and the traditional comparison of what is better?
CNC technology, which is the use of digital information on the machine movement and processing of a control method. CNC machine tools for the implementation of processing control, or equipped with a CNC system called CNC (NC) machine. CNC system, including: numerical control devices, programmable controllers, spindle drives and feed devices and other parts of the traditional mechanical processing are used to operate the ordinary machine work, processing hand shake the mechanical cutting tool metal by the eye with a caliper and other tools Measure the accuracy of the product. Modern industry has long been using computerized digital control of the machine to operate, and CNC lathe processing can be in accordance with the technical staff prepared a good program for any product and parts directly processed. This is what we say "
CNC machining". CNC machine tools, electrical, liquid, gas, light height of the integration of products. CNC lathe processing is widely used in any field of all mechanical processing, mold processing is the development trend and important and necessary technical means.
CNC tool lathe processing, to correctly select the tool geometry and related parameters.
CNC cutting cutting, including cutting depth, spindle speed, feed speed and so on. In the preparation of the processing process, all kinds of processing should be included in the processing program, the choice of cutting the amount should be cutting depth, spindle speed and feed speed to adapt to each other to form a good cutting parameters The Determination of spindle speed: The diameter of the part to be machined on the part shall be determined by the cutting speed permitted by the parts and the tool material and the machining properties. Feed rate determination: In order to ensure quality requirements, in order to improve productivity, you can choose a higher feed rate. In the cut, processing hole as far as possible to choose a lower feed rate. When finishing, the feedrate should be smaller.
In order to improve production efficiency and reduce the number of passes, but also the need for CNC lathe processing to correctly select the relevant parameters.
