Introduction of CNC Lathe Machining and Thread Parts Machining

   CNC lathe machining is the need to use a variety of tooling parts for processing. Here we will give you a separate thread to deal with the need for cutting the tool: Taps, commonly known as wire tapping. Is the main tool for CNC lathe processing thread. Taps are divided into the following three kinds:

    1. screw taps: screw taps flank is with a helix angle, the cutting edge is relatively sharp. The spiral taps are in a spiral state in the form of a chip chute, which, like the drill bit, is used to remove the chip from the spiral groove when the thread is machined. This will be able to effectively prevent the collapse of the situation.

   2. Straight taps, that is, we usually the most commonly used tap, can be used in any material thread processing, especially small thread, are basically using tap to process.

  3. Extruded taps, mainly by the use of extrusion methods to thread processing. Cutting force is relatively large, generally used in copper thread processing.