CNC lathe processing on the material requirements
The following are the same as the "
The current parts are basically the use of precision CNC lathe processing. In the parts processing industry has occupied the absolute market. But not so the material parts can use CNC lathe processing I produce. Because the CNC lathe processing of the material is limited. Damage to the lathe if it is out of range. Especially the hardness of the material is very easy to collapse the lathe. Here we give you about CNC lathe processing on the material requirements.
The following are the same as the "
1. First of all, the material hardness requirements: parts of the material must be lower than the hardness of a lathe above grade. Otherwise there will be the possibility of collapse of the lathe.
2. Second, the material soft and hard moderate, at least lower than the mechanical hardness of a grade, but also depends on the role of processing equipment is what to use, the rational selection of mechanical parts.
In short, CNC lathe processing of the material requirements or some. Too soft or too hard information, the former is not necessary processing, while the latter is unable to process.
