CNC lathe processing safety precautions

   CNC lathe processing not only to ensure that the operator's personal safety, but also must comply with the safe operation of the use of rules in order to ensure the safety of the normal use of the machine. We all know that CNC lathes are high precision machining equipment, the machine is very expensive. So we must pay attention to the following when using CNC lathe parts processing:

   1. CNC lathe parts processing must be carefully implemented "metal cutting machine general operating procedures" the relevant provisions.
2. To change the direction of the spindle rotation, you must first stop after the spindle, are not allowed to suddenly change the direction of rotation.
   3. Parts processing to find the workpiece, only use the hand plate to move the chuck or open the lowest speed to find positive, are not allowed to open high-speed correction.
4. CNC lathe processing tool installation should not be extended too long, the gasket to be flat, width and tool width of the bottom of the same.
5. Work is not allowed to open the anti-car method to brake the spindle rotation.

 6. When loading and unloading chuck, only use the hand to rotate the V-belt drive spindle rotation line, absolutely prohibit the direct start of the machine forced release or tighten. At the same time in the bed to block the board, to prevent accidents.

key words: metal machining,cnc precision machining,cnc turnning parts