CNC processing should pay attention to what
1.CNC in the processing of the operator does not allow close observation of the cutting position, to prevent the chip into the eyes. As far as possible before loading card material and then loaded card tool to prevent the time in the card material when the hand hit the tool above. If you have installed the tool, in the card material, the first should be moved to the outside of the table to ensure that when the card material, and will not interfere with the tool to avoid injury or break the tool.
2. Before starting the process, check the nozzle position before opening the pump switch to avoid ejecting it to other locations. When removing the tool, be sure to first observe whether the spindle stops rotating.
3. When unloading the hand, do not force or pinch the blade of the tool to avoid cutting the blade.
4. Wrench should be placed in the tool storage area, not allowed to put on the Y-axis shield or beam.
5. As far as possible before loading card material and then loaded card tool to prevent the card material in the time when the hand hit the tool above. If you have installed the tool, in the card material, the first should be moved to the outside of the table to ensure that when the card material, and will not interfere with the tool to avoid injury or break the tool.
6. Inspection After we have finished processing, before the removal of the workpiece, first of all to the necessary size or appearance of the initial detection, inspection qualified to remove the workpiece, so as not to dismantle after the secondary processing of the positioning problem and cause scrap. The removed workpieces are further tested for some key dimension data to ultimately meet the machining requirements.
When removing the tool, be sure to first observe whether the spindle stops rotating.
7.
Dongguan CNC machining in the processing of the gap to suspend observation, be sure to move the table from the cutting position.
8. When removing the tool, be sure to first observe whether the spindle stops rotating.
