FANUC system of CNC lathe
First, start the machine
1) open the power the machine;
2) open the power of the CNC system.
3) open the stop switch
Two. The setting of the spindle speed
U puts the way of work in the "MDI" mode;
U press the "program key";
U press the "MDI" key at the bottom of the screen.
U input speed and steering (such as "S500M03", then press "INSRT").
U press the start key.
Three. The tool (setting up the work piece coordinate system)
Usually, the origin of the work piece coordinate system is located at the center of the right end of the work piece, and the hand wheel mode is used for tool setting.
When the work piece is far away, select the X100 file and choose the X10 file close to it.
1, let the spindle rotate first, choose X axis and Z axis "-" to move towards the right end of the bar.
2.Z origin: select the X axis, Z axis and move the tip light to the right end face, and cut the end face with a very small cutting volume, exit along the +X direction and stop the spindle. Under the manual data input mode, press OFFSET.
Key words:CNC turning machining
Next Article:How to learn CNC machining?
