What do you attention on the CNC lathe machining?
CNC lathes are used in machining materials that are usually machined by lathes for easy cutting steel and copper, S of sulfur containing steel and high material containing adjacent P, sulfur and manganese exist in the form of manganese sulfide in steel, and manganese sulfide is lubricated in steel, making the steel easier to cut, thus improving the production of the lathe. Production schedule. So what should CNC numerical control lathe pay attention to when processing?
Carefully implement the relevant provisions of the General Operating Procedures for Metal Cutting Machines.
Carefully implement the following general regulations on lathes:
1. When aligning the work piece, only manual chuck or open the lowest speed alignment, not open the high speed alignment.
2. When changing the rotation direction of the spindle, it is necessary to stop the spindle first and then proceed.
3. when loading and unloading chuck, only use the hand to turn the triangle belt to drive the spindle back and forth. At the same time, we should lay wooden blocks on the bed to prevent accidents.
4. tool installation should not be extended too long, the gasket should be straight and the width is the same as the width of the tool bottom.
5, in the work can not open the anti machining method to brake spindle rotation.
Key words: CNC lathe machining
Next article:The advantage of Automatic Lathe
